CAI on Black Locust, the Ingrid & Gaffs

CAI in the rudder.

Layout of the Ingrid 38

Black Locust
Materials are really important in the ocean environment.  Black locust is a very good boat building wood since it is very rot resistant and stronger than oak.  Black locust is rare in boats though. It's not frequently sold commercially because it's a crooked growing tree. 'Not much profit, too much processing.

The Ingrid
William Aktin designed the Ingrid 38 with inspiration from the famous Colin Archer Rescue vessels for Norway coast.   Bad sea, storms and cold weather. So they needed to be quick in heavy weather, managed with a minimal crew and be able to tow other boats in to safety.  These were the days before engines.
Here's a link to the Atkin site.    Atkin & Co. - Ingrid

Gaff Rigs
The gaff rig is old and traditional for Colin Archers.  It’s a simple rig, easy to reef with a low sail area so the boat does not heal over so much.   

Forward Hatches (Today's Project)

Today's goal is to finish the hatches that provide access from the forward berth to forward storage.  The dark frames need to be glued on and the hatches need to be installed onto the bulkhead.  Sounds so simple.  Who can guess what surprises will occur!

FIVE Trees in the Boat.

Trees to lumber to beams and paneling

Several years ago (2007?) CAI came home and told me he bought 5 black locust trees that had been cut down somewhere in Spokane.  "This will be the interior of our boat" he says! "Myron (a delightful 80 yr old neighbor-friend who has an old saw mill) will cut it into lumber for me."

Black Locust Beams
6 layers per beam, each layer cut and
shaped separately, then bonded together. 

And he did it.  Then CAI came home with 4" thick boards.  They are now stacked next to the shop and drying in an 8 ft x 8 ft x 16 ft stack of lumber.

Starting last year, CAI has been cutting the lumber for the boat, building beams and paneling and more.

Black Locust Paneling

 

It's in Our Backyard

We're standing on the ladder.  See us?

The hull was trailered to our place from Bellingham, WA.  The driver turned around when he got here and then backed up a hill into this spot next to CAI's shop.  It was really impressive. It will be just as impressive taking it out. 

Where will our first mooring be??
'don't know yet.  Maybe Ocean Shores, WA.

We'll trailer it  over when CAI is ready.  Maybe summer of 2014.  The boat will be about 75% complete at that point. 

  

Below I'm sitting in the foreclosure.  It's an old picture.

It will be our bedroom when we are in port.  The boat will be moving too much on the open water to sleep here.  We'll sleep in the "salon" instead.  More on that later.

Notice the beams.  Some cross overhead completely.  Others have a partial span.  CAI built these beams.  More on this in the next post.

Not Exactly Sailing

Here I am at the bottom of the hill at the end of the day. 
You ski to here, then you walk out - maybe 50 yards.

The view of the Palmer snow field where you ski. 
It's waaaaayy  up there.

OK - It's not sailing or boat building but skiing shares that wind in your face exhilaration.  I went skiing on Mt Hood last month with my ski instructor buddies.  What a total blast!

I skied with 3 other guys that were certified to levels higher than my Level III status.  There aren't many of that stature running around.

I also skied with the (just retired) general manager of Brundage Mtn Ski Area in McCall Idaho.   Small world.

. 

Our Sail Design, almost...

A Colin Archer,
a famous Norwegian rescue boat

Here's an example of the gaff rig sail design that CAI is going to use.  'Not very commonly seen any more.

Notice the gaff sails (with a spar or bar across the top.)  Good for sailing downwind.  Not so good for sailing upwind.  Of course cruising should be all down wind if you are lucky :-). 

That sail at the very top....  not sure we'll have one of those.

The Flagship (s/v Ingrid Princess)

This is the Ingrid Princess.  This boat is a 38' 1977 Blue Water Ingrid with a ketch rig.  It is the flagship of the Blue Water designed Ingrid hulls and it based on the Colin Archer design.  CAI is building a boat using the same 38' hull construction - a double-ender or pointy on both ends.

S/V Ingrid Princess